cm201-2原版rom通过TTL操作U盘备份文件,请专家帮破解_澳门十大博彩娱乐网址移动魔百盒_ZNDS - 专业博彩评级网
首页 收藏 QQ群
 网站导航
开启辅助访问

QQ登录

只需一步,快速开始

扫一扫,访问微社区

立即注册 找回密码
查看: 75862|回复: 242
[移动魔百和]

专业博彩评级网

  [复制链接]
发表于 2018-3-15 14:21 | 显示全部楼层 |阅读模式
本帖最后由 山阴路的夏天 于 2018-3-15 14:26 编辑

机器打开后,电视一直显示“正在登陆”,因为没有开通移动的IPTV,所以看不了移动的电视。
当贝桌面使用TTL专业博彩评级网失败。请专家给思路。
ROM备份网址:
链接:https://pan.baidu.com/s/1oz6VXSSCfOWu6FZI-1_XfA
游客,如果您要查看本帖隐藏内容请回复

发表于 2018-3-18 08:53 | 显示全部楼层
谢谢分享
回复 支持 1 反对 0

使用道具 举报

发表于 2018-3-15 15:00 | 显示全部楼层
你已经把system备份出来了,现在可以下载个ROM助手,直接编辑,内置添加当贝桌面进去试试看
回复 支持 0 反对 1

使用道具 举报

 楼主| 发表于 2018-3-15 14:38 | 显示全部楼层
TTL显示的启动过程:
Bootrom start
Boot Media: eMMC
Decrypt auxiliary code ...OK

lsadc voltage min: 000001AA, max: 000001AB, aver: 000001AA, index: 00000003

Enter boot auxiliary code

Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Sep  7 2017 - 01:06:39

Reg Version:  v1.5.2\
Reg Time:     2017/11/15 17:13:15
Reg Name:     hi3798mv3dmm_hi3798mv300_DDR3-1866_1GB_16bitx2_4layers.reg

Boot auxiliary code success
Bootrom success


System startup


Relocate Boot

Jump to C code


Fastboot 3.3.0 ([email protected]) (Jan 03 2018 - 16:24:09)

Fastboot:      Version 3.3.0
Build Date:    Jan  3 2018, 16:25:10
CPU:           Hi3798Mv300
Boot Media:    eMMC
DDR Size:      1GB

Found flash memory controller hifmc100.
no found nand device.

MMC/SD controller initialization.
scan edges:2 p2f:4 f2p:6
mix set temp-phase 1
scan elemnts: startp:78 endp:75
Tuning SampleClock. mix set phase:[01/07] ele:[11/13]
MMC/SD Card:
    MID:         0x70
    Read Block:  512 Bytes
    Write Block: 512 Bytes
    Chip Size:   7296M Bytes (High Capacity)
    Name:        "M72808"
    Chip Type:   MMC
    Version:     5.1
    Speed:       100000000Hz
    Mode:        HS400
    Voltage:     1.8V
    Bus Width:   8bit
    Boot Addr:   0 Bytes

*** Warning - bad CRC or eMMC, using default environment

Net:   upWarning: failed to set MAC address
, gmac0Warning: failed to set MAC address


Boot Env on eMMC
    Env Offset:          0x00100000
    Env Size:            0x00010000
    Env Range:           0x00010000
Get ID_WORD lock flag : 0


SDK Version: spc012cp0001_v2017120708

emmc<5>
[sw_ptable_init,114] begin
partition addr : [0x0]
partition addr : [0x200000, 0x100000]
[swflash_partition_read,217]part_addr:0x200000, part_size:0x100000, offset:0x0, bytes:0xb10
[sw_ptable_check,292]cksum [0xddba], ptable->checksum[0xddba]
[sw_ptable_init,140] data at 0x0 is ok
[swflash_partition_read,217]part_addr:0x200000, part_size:0x100000, offset:0x0, bytes:0xb10
[sw_ptable_check,292]cksum [0xddba], ptable->checksum[0xddba]
0          fastboot    0x000000000     0x000200000
0         partition    0x000200000     0x000200000
0          recovery    0x000400000     0x001000000
0         swdevinfo    0x001400000     0x000200000
0         baseparam    0x001600000     0x000800000
0           pqparam    0x001E00000     0x000800000
0              logo    0x002600000     0x000800000
0          fastplay    0x002E00000     0x002000000
0              boot    0x004E00000     0x001000000
0              misc    0x005E00000     0x000200000
0       trustedcore    0x006000000     0x002800000
0       securestore    0x008800000     0x000800000
0              swdb    0x009000000     0x001000000
0             cache    0x00A000000     0x02D000000
0            system    0x037000000     0x040000000
0          userdata    0x077000000     0x14E800000

ptable info:2M(fastboot),2M(partition),16M(recovery),2M(swdevinfo),8M(baseparam),8M(pqparam),8M(logo),32M(fastplay),16M(boot),2M(misc),40M(trustedcore),8M(securestore),16M(swdb),720M(cache),1024M(system),5352M(userdata)

[sw_ptable_dump->252] tmp_bootargs_env=blkdevparts=mmcblk0:2M(fastboot),2M(partition),16M(recovery),2M(swdevinfo),8M(baseparam),8M(pqparam),8M(logo),32M(fastplay),16M(boot),2M(misc),40M(trustedcore),8M(securestore),16M(swdb),720M(cache),1024M(system),5352M(userdata)
[sw_ptable_init,183] partition : ok
sw_devinfo_init begin [sw_devinfo_init,823]
[swflash_partition_read,217]part_addr:0x1400000, part_size:0x200000, offset:0x0, bytes:0x8461c
[swflash_partition_read,217]part_addr:0x1500000, part_size:0x200000, offset:0x0, bytes:0x8461c
version : [0]
[devinfo_check,169] ok! msg->checksum:0xf564, crc16:0xf564
devinfo_init begin [sw_devinfo_init,946]
[devinfo_ext_check,258] ok! msg->checksum:0x0, crc16:0x0
sw_devinfo_init OK
[swflash_partition_read,217]part_addr:0x4e00000, part_size:0x1000000, offset:0x0, bytes:0x2000
use boot cmdline,enable serial, cmdline:[mem=1G  mmz=ddr,0,0,48M vmalloc=500M flashcache=10 quiet console=ttyAMA0,115200 blkdevparts=mmcblk0:]

[sw_boot_set_bootargs->175]use nand m_cmdline: mem=1G  mmz=ddr,0,0,48M vmalloc=500M flashcache=10 quiet console=ttyAMA0,115200 blkdevparts=mmcblk0:2M(fastboot),2M(partition),16M(recovery),2M(swdevinfo),8M(baseparam),8M(pqparam),8M(logo),32M(fastplay),16M(boot),2M(misc),40M(trustedcore),8M(securestore),16M(swdb),720M(cache),1024M(system),5352M(userdata)
sw_ir_detect begin 500 count
sw_ir_detect ok

[sw_boot_set_bootargs->242]bootargs:[mem=1G  mmz=ddr,0,0,48M vmalloc=500M flashcache=10 quiet console=ttyAMA0,115200 blkdevparts=mmcblk0:2M(fastboot),2M(partition),16M(recovery),2M(swdevinfo),8M(baseparam),8M(pqparam),8M(logo),32M(fastplay),16M(boot),2M(misc),40M(trustedcore),8M(securestore),16M(swdb),720M(cache),1024M(system),5352M(userdata) androidboot.selinux=permissive androidboot.force_open_console=none]

[Android_Main,39] begin
[sw_set_gpio,128] OK
[swflash_partition_read,217]part_addr:0x5e00000, part_size:0x200000, offset:0x0, bytes:0x10000
boot normal!!!
[sw_boot_set_bootcmd->365]bootm now: mmc read 0 0x1FFFFC0 0x27000 0x8000;bootm 0x1FFFFC0
[Android_Main,86] ok
Reserve Memory
    Start Addr:          0xFFFE000
    Bound Addr:          0x8D99000
    Free  Addr:          0xF1F9000
    Alloc Block:  Addr         Size
                  0xFBFD000   0x400000
                  0xF8FC000   0x300000
                  0xF8F9000   0x2000
                  0xF878000   0x80000
                  0xF725000   0x152000
                  0xF3A0000   0x384000
                  0xF39C000   0x3000
                  0xF206000   0x195000
                  0xF1FC000   0x9000
                  0xF1F9000   0x2000

[abortboot,110] begin
[abortboot,113] close loader keyed

MMC read: dev # 0, block # 159744, count 32768 ... 32768 blocks read: OK

157066506 Bytes/s
Check Hisilicon_ADVCA ...
Not hisilicon ADVCA image ...

Found Initrd at 0x04E00000 (Size 747485 Bytes), align at 2048 Bytes

## Booting kernel from Legacy Image at 020007c0 ...
   Image Name:   Linux-3.18.24_hi3798mv2x
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    9092088 Bytes = 8.7 MiB
   Load Address: 02000000
   Entry Point:  02000000
   Loading Kernel Image from 0x33556480 to 0x33554432 ... OK
OK
There are some conflict between "booargs" and "bootargs_1G".
The param "mmz " in "bootargs_1G" will be ignored.

ATAGS [0x00000100 - 0x000004D4], 980Bytes

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
>>>  init /disk2/zhangchaoyang/SDK/Hisi3798MV300_mlc/device/hisilicon/bigfish/sdk/source/kernel/linux-3.18.y/drivers/usb/usbir/usb-ir.c  usb_usbir_init
init: /init.bigfish.rc: 55: invalid command 'getprop'
init: /init.bigfish.rc: 114: invalid option 'sdcard_r'
init: could not import file '/init.sunniwell.rc' from '/init.rc'
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
init: e2fsck /dev/block/platform/soc/by-name/system
init: e2fsck /dev/block/platform/soc/by-name/userdata
init: e2fsck /dev/block/platform/soc/by-name/swdb
init: e2fsck /dev/block/platform/soc/by-name/cache
EXT4-fs (mmcblk0p12): VFS: Can't find ext4 filesystem
init: e2fsck /dev/block/platform/soc/by-name/securestore
init: 630,mount -t ext4  /dev/block/platform/soc/by-name/securestore-->/securestore.
EXT4-fs (mmcblk0p12): VFS: Can't find ext4 filesystem
init: 648,mount -t ext4  /dev/block/platform/soc/by-name/securestore-->/securestore failed.
init: /dev/hw_random not found
init: call cmd SYS_GET_CHIPPACKAGETYPE failed :Invalid argument
init: reg_value = 0xffffffff
init: read reg value failed
init: [devinfo] name:mac,value:54:C5:7A:4D:68:FF
init: [devinfo] name:serialno,value:005001FF0001061003B154C57A4D68FF
init: [devinfo] name:secureline,value:1
init: [devinfo] name:cmcc_sn,value:111001611223447
init: sw_properties_init end..
healthd: wakealarm_init: timerfd_create failed
init: cannot find '/system/bin/rild', disabling 'ril-daemon'
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/bin/teecd', disabling 'teecd'
init: cannot find '/system/bin/frontPanel', disabling 'frontPanel'
init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
init: cannot find '/system/bin/gpio-led', disabling 'gpio-led'
init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
healthd: No charger supplies found
[email protected]:/ # init: sys_prop: permission denied uid:1002  name:persist.bt.fwdump
init: untracked pid 1706 exited
init: sys_prop: permission denied uid:1000  name:ro.config.gfx2d_compose
init: untracked pid 1707 exited
init: sys_prop: permission denied uid:1000  name:java.net.preferIPv4Stack
init: sys_prop: permission denied uid:1000  name:java.net.preferIPv6Addresses
init: untracked pid 3106 exited

点评

有cm201-2 eMMC分区表吗?  详情 回复 发表于 2018-7-22 09:19
回复 支持 反对

使用道具 举报

发表于 2018-3-15 15:07 | 显示全部楼层
另外我看了下,build内这两句 你内置了当贝桌面之后需要修改成当贝桌面对应的包名 然后再打包
epg.launcher.packagename=net.sunniwell.guide
epg.launcher.classname=net.sunniwell.guide.MainActivity
回复 支持 反对

使用道具 举报

发表于 2018-3-15 15:12 | 显示全部楼层
链接:https://pan.baidu.com/s/1jKh-0n7auOkp5AdeTY77AA 密码:yxgk
刚刚用你的文件做了个卡刷包,你试试拷贝到U盘 插盒子 本地更新,先不用重命名试试。

如果不识别就重命名为 update.zip 试试

最后 记得反馈结果给我

点评

北京用户刷不了,显示硬件类型不一致  详情 回复 发表于 2018-3-18 15:11
你就是恩山论坛的哪个替换当贝桌面的大神?  详情 回复 发表于 2018-3-15 19:52
回复 支持 反对

使用道具 举报

 楼主| 发表于 2018-3-15 15:33 来自ZNDS手机版 | 显示全部楼层
谢谢!

点评

测试了吗 结果如何  详情 回复 发表于 2018-3-15 16:01
回复 支持 反对

使用道具 举报

发表于 2018-3-15 15:45 | 显示全部楼层
又见一个好帖,果断先马克mark收藏了!
回复 支持 反对

使用道具 举报

发表于 2018-3-15 16:01 | 显示全部楼层

测试了吗 结果如何
回复 支持 反对

使用道具 举报

 楼主| 发表于 2018-3-15 18:38 来自ZNDS手机版 | 显示全部楼层
还没有,再次备份一次固件,晚上反馈结果
回复 支持 反对

使用道具 举报

 楼主| 发表于 2018-3-15 19:24 来自ZNDS手机版 | 显示全部楼层
该机器没有本地更新菜单,任何文件名,重新开机也无法进入升级界面

点评

有啊,设置里面找找吧!  详情 回复 发表于 2018-3-15 19:50
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

推荐应用 上一条 /6 下一条

Archiver|新帖|标签|软件|Sitemap|ZNDS智能电视网 ( 浙ICP备14000780号 )

增值电信业务经营许可证:浙B2-20150411 丨 浙公网安备 33010802006145号

浙网文(2016)6491-366号 | GMT+8, 2018-8-19 21:57 , Processed in 0.074754 second(s), 22 queries , MemCache On.

Powered by Discuz!

监督举报:report#babyoiled.com (请将#替换为@)

© 2007-2018 babyoiled.com

快速回复 返回顶部 返回列表